01 /

Online Conductivity Controller with 4-20mA

This controller provides reliable conductivity and TDS monitoring for industrial water treatment and panel-mounted control systems.

Get A Quote

Show All Products: Show Conductivity Sensor & Controller

Model	AEC1-T1
Principle	Two-electrode
Display Range	Conductivity: 0~20mS/cm, Resistivity: 0~18.25MΩ.cm, TDS: 0~10g/L, Salinity: 15ppt , Temp: -10~150℃
Resolution	Conductivity: 0.001μS/cm, Resistivity: 0.01MΩ.cm, TDS: 0.01mg/L, Salinity: 0.01ppt, Temp.: 0.1℃
Accuracy	Conductivity: ±1.0% F.S Temp: 0.5℃
Repeatability	Better than ±0.3% F.S of measuring range
Temp Compensation	Automatic or manual (NTC10K/PT1000@customized)
Relay Output	Two SPST relays, Max. load 3A/250VAC, set high/low alarm, temp. or clean control
Digital Output	N/A
Current Output	Two 0/4~20mA , Max. load 1000Ω, Support long-line calibration
Language	English
Display	128*64 3.2-inch graphic dot matrix LCD
Calibration Method	Conductivity standard solution, supports multi-point calibration
Protection Grade	IP66
Enclosure Material	Enhanced ABS
Dimension	100mmx100mmx120mm (Hole size 92mmx92mm)
Power Supply	AC: 100~240V 50/60Hz or DC:18~36V
Work Temperature	0~60℃, RH<95%, non-condensing
Storage Temperature	-20~70℃, RH<55%, non-condensing
Installation	Panel (default) or wall mounting (order)
Power Consumption	Max. 3W

Overview